White Waterslide Decal Paper (NO BAKE) - Inkjet & Laser

$20 $25

5 pack white A4 waterslide decal paper for inkjet or laser printers.

  1. Print your design with printer and let dry for at least 3 minutes.
  2. Take printed paper and clear acrylic spray (about 20cm away from the image, in a well ventilated area).  
  3. Let dry - can use hair dryer on cold setting, or let stand for about an hour.
  4. Cut out your design leaving 2-3mm gap around it.
  5. Fill your bowl with room temperature water. Submerge you pre cut decal for 30-60 seconds or until the middle of the decal can easily be slid around. Remove from water (smaller decals will take less time).
  6. Quickly apply it to your clean decal surface. Position decal, backing side down and gently slide backing off. Keep the backing flush with your project as you gently pull it out from behind the decal.  Press firmly, use your fingers, a damp cloth/ paper towel or a mini squeegee to remove air bubbles. Gently pad off any excess water.
  7. No baking required - air dry only! Can not be used in the dishwasher.

Please remember to use clear paper on light surfaces and white paper on dark surfaces.  The clear paper image will not show up on darker surfaces. Can also use dye or pigment ink!



 

You may also like

Recently viewed